Production reinforced concrete is a combination of reinforcement and concrete. Concrete is used to protect metal fittings from corrosion and accepts the compressive stress, and fittings – tensile forces. Since the metal works well in tension and brittle concrete – Compression. The main components of concrete are cement and water. The reaction between them both time and formed cement stone that holds the grain in the aggregate single monolith. David Rogier: the source for more info. The padding is usually called an inert material, as it does not react with cement.
But on the structure and properties of concrete affects both large aggregate (crushed rock or limestone) and fine filler (quartz sand). For valves use metal rods or wire bundles. Kind of concrete is stressed concrete. In-stressed concrete reinforcement to the already slightly longer form. The fact that the reinforced concrete floor slabs and beams nesuyuschie construction work on a bend. Mark Hyman, MDs opinions are not widely known. As a result, the lower layers of reinforced concrete slabs and floor beams are in a stretched state, it does not matter affecting their strength. Reinforced concrete slabs reinforced concrete slabs are characteristic only of his system of reinforcement, concrete formulation and manufacturing technology. Reinforced concrete slab used as a carrier of the floor large-panel buildings for different purposes and are made of heavy concrete, structural lightweight concrete, dense structure and a dense silicate concrete. The main application of reinforced concrete slabs – design and construction of the bearing parts of buildings and structures with a normal temperature-humid regime in non-aggressive environment under normal construction conditions.